diff --git a/README.md b/README.md index 9a37dd6..a37b7d7 100644 --- a/README.md +++ b/README.md @@ -56,6 +56,7 @@ 16. 如果单点延迟低但滑动时延迟极大, 请将脚本中 `TOUCH_THREAD_SLEEP_MODE` 修改为 false, 或者可以调小 `TOUCH_THREAD_SLEEP_DELAY` 的值(如果还是卡请提 issue 反馈) + ## 命令列表 游戏时如果不小心断开连接, 请在控制台输入 `start` 并回车来重新连接游戏 @@ -72,9 +73,13 @@ Q: 在安卓高版本(13,14)上测试触摸区域完全对不上，只有点屏 A: 按步骤修改脚本内 `ANDROID_ABS_MONITOR_SIZE` 和 `ANDROID_ABS_INPUT_SIZE` 配置 +Q: 关闭再打开报错 + +A: 如果直接关闭控制台窗口有可能导致后台进程残留，请使用任务管理器彻底关闭进程或者使用Ctrl+C终止程序 + ## 注意 -想要加 2P 的重新复制一下脚本并添加串口 COM4 到 COM44 的转发就好 +想要加 2P 的重新复制一下脚本并添加串口 COM4 到 COM44 的转发，并且在配置文件“SPECIFIED_DEVICES”中指定使用“adb devices”获取到的设备序列号 该脚本仅用于测试, 目前来说打 12+及以下应该是问题不大, 12+以上水平不够没试过. diff --git a/config.yaml b/config.yaml index fc34906..d3c9806 100644 --- a/config.yaml +++ b/config.yaml @@ -20,6 +20,8 @@ ANDROID_REVERSE_MONITOR: false TOUCH_THREAD_SLEEP_MODE: false # 每次 sleep 的延迟, 单位: 微秒, 默认 100 微秒 TOUCH_THREAD_SLEEP_DELAY: 100 +#当需要指定触控设备时填上使用“adb devices”获取到的设备序列号，留空则只支持单设备连接 +SPECIFIED_DEVICES: "" # RGB 颜色值对应区块配置 exp_image_dict: diff --git a/main.py b/main.py index 662be54..1b560e3 100644 --- a/main.py +++ b/main.py @@ -32,6 +32,8 @@ ANDROID_REVERSE_MONITOR = False TOUCH_THREAD_SLEEP_MODE = False # 每次 sleep 的延迟, 单位: 微秒, 默认 100 微秒 TOUCH_THREAD_SLEEP_DELAY = 100 +#当需要指定触控设备时填上使用“adb devices”获取到的设备序列号，留空则只支持单设备连接 +SPECIFIED_DEVICES = "" exp_list = [ ["A1", "A2", "A3", "A4", "A5", ], @@ -52,12 +54,14 @@ exp_image_dict = {'41-65-93': 'A1', '87-152-13': 'A2', '213-109-81': 'A3', '23-2 class SerialManager: - p1Serial = serial.Serial(COM_PORT, COM_BAUDRATE) - settingPacket = bytearray([40, 0, 0, 0, 0, 41]) - startUp = False - recvData = "" + def __init__(self): + self.p1Serial = serial.Serial(COM_PORT, COM_BAUDRATE) + self.settingPacket = bytearray([40, 0, 0, 0, 0, 41]) + self.startUp = False + self.recvData = "" + self.touchQueue = queue.Queue() self.data_lock = threading.Lock() self.touchThread = threading.Thread(target=self.touch_thread) @@ -249,54 +253,58 @@ def getevent(): touch_index = 0 # 执行 adb shell getevent 命令并捕获输出 - process = subprocess.Popen(['adb', 'shell', 'getevent', '-l'], stdin=subprocess.PIPE, stdout=subprocess.PIPE) + adb_cmd = 'adb shell getevent -l' + if SPECIFIED_DEVICES: + adb_cmd = 'adb -s ' + SPECIFIED_DEVICES + ' shell getevent -l' + process = subprocess.Popen(adb_cmd, stdin=subprocess.PIPE, stdout=subprocess.PIPE) key_is_changed = False # 读取实时输出 for line in iter(process.stdout.readline, b''): try: + event = line.decode('utf-8').strip() - _, _, event_type, event_value = event.split() - # print(event_type, int(event_value, 16)) + parts = event.split() + + # 屏蔽没用的东西 + if len(parts) < 4: + continue + + event_type = parts[2] + event_value_hex = parts[3] + event_value = int(event_value_hex, 16) + if event_type == 'ABS_MT_POSITION_X': key_is_changed = True - if not ANDROID_REVERSE_MONITOR: - touch_data[touch_index]["x"] = int(int(event_value, 16) * abs_multi_x) - else: - touch_data[touch_index]["x"] = ANDROID_ABS_MONITOR_SIZE[0] - int(int(event_value, 16) * abs_multi_x) + touch_data[touch_index]["x"] = (ANDROID_ABS_MONITOR_SIZE[0] - event_value * abs_multi_x) if ANDROID_REVERSE_MONITOR else event_value * abs_multi_x + elif event_type == 'ABS_MT_POSITION_Y': key_is_changed = True - if not ANDROID_REVERSE_MONITOR: - touch_data[touch_index]["y"] = int(int(event_value, 16) * abs_multi_y) - else: - touch_data[touch_index]["y"] = ANDROID_ABS_MONITOR_SIZE[1] - int(int(event_value, 16) * abs_multi_y) + touch_data[touch_index]["y"] = (ANDROID_ABS_MONITOR_SIZE[1] - event_value * abs_multi_y) if ANDROID_REVERSE_MONITOR else event_value * abs_multi_y + elif event_type == 'SYN_REPORT': - if not key_is_changed: - continue - # print("Touch Data:", touch_data) - # 向 convert 函数发送数据 - key_is_changed = False - # start_time = time.perf_counter() - convert(touch_data) - # print("单次执行时间:", (time.perf_counter() - start_time) * 1e3, "毫秒") + if key_is_changed: + convert(touch_data) + key_is_changed = False + elif event_type == 'ABS_MT_SLOT': key_is_changed = True - touch_index = int(event_value, 16) + touch_index = event_value if touch_index >= touch_sum: touch_sum = touch_index + 1 + elif event_type == 'ABS_MT_TRACKING_ID': key_is_changed = True - if event_value == "ffffffff": + if event_value_hex == "ffffffff": touch_data[touch_index]['p'] = False touch_sum = max(0, touch_sum - 1) else: touch_data[touch_index]['p'] = True touch_sum += 1 - else: - continue - except Exception: + + except Exception as e: event_error_output = line.decode('utf-8') - if "name" in event_error_output: + if "name" not in event_error_output: continue print(event_error_output) @@ -321,6 +329,7 @@ if __name__ == "__main__": TOUCH_THREAD_SLEEP_MODE = c["TOUCH_THREAD_SLEEP_MODE"] TOUCH_THREAD_SLEEP_DELAY = c["TOUCH_THREAD_SLEEP_DELAY"] exp_image_dict = c["exp_image_dict"] + SPECIFIED_DEVICES = c["SPECIFIED_DEVICES"] else: print("未找到配置文件, 使用默认配置") @@ -330,6 +339,7 @@ if __name__ == "__main__": abs_multi_y = ANDROID_ABS_MONITOR_SIZE[1] / ANDROID_ABS_INPUT_SIZE[1] print("当前触控区域X轴放大倍数:", abs_multi_x) print("当前触控区域Y轴放大倍数:", abs_multi_y) + print("当前链接到端口：", COM_PORT) print(('已' if ANDROID_REVERSE_MONITOR else '未') + "开启屏幕反转") serial_manager = SerialManager() serial_manager.start()