idz: add ffb and led emulation

board/ffb.c

@@ -138,6 +138,7 @@ static HRESULT ffb_req_dispatch(const union ffb_req_any *req)
         return ffb_req_rumble(req->bytes);
     case FFB_CMD_DAMPER:
         return ffb_req_damper(req->bytes);
+
     /* There are some test mode specfic commands which doesn't seem to be used in
        game at all. The same is true for the initialization phase. */
 
@@ -206,7 +207,7 @@ static HRESULT ffb_req_rumble(const uint8_t *bytes)
         max_period = period;
     }
 
-    // dprintf("FFB: Rumble Period: %d (Min %d, Max %d), Strength: %d (Max: %d)\n", period, min_period, max_period, force, max_rumble);
+    // dprintf("FFB: Rumble Period: %d (Max %d), Strength: %d (Max: %d)\n", period, max_period, force, max_rumble);
     if (ffb_ops->rumble != NULL) {
         ffb_ops->rumble(force, period);
     }

dist/idz/segatools.ini

@@ -69,6 +69,20 @@ region=4
 ; exactly one machine and set this to 0 on all others.
 dipsw1=1
 
+[ffb]
+; Enable force feedback (838-15069) board emulation. This is required for
+; both DirectInput and XInput steering wheel effects.
+enable=1
+
+; -----------------------------------------------------------------------------
+; LED settings
+; -----------------------------------------------------------------------------
+
+[led15070]
+; Enable emulation of the 837-15070-02 controlled lights, which handle the
+; cabinet and seat LEDs.
+enable=1
+
 ; -----------------------------------------------------------------------------
 ; Misc. hooks settings
 ; -----------------------------------------------------------------------------
@@ -212,6 +226,21 @@ reverseAccelAxis=0
 reverseBrakeAxis=0
 
 ; Force feedback settings.
-; Strength of the force feedback spring effect in percent. Possible values
+; Only works when FFB board emulation is enabled!
-; are 0-100.
+;
-centerSpringStrength=30
+; It is recommended to change the strength inside the Game Test Mode!
+;
+; These settings are only used when using DirectInput for the wheel.
+; The values are in the range 0%-100%, where 0 disables the effect and
+; 100 is the maximum.
+
+; Constant force strength, used for centering spring effect.
+constantForceStrength=100
+; Damper strength, used for steering wheel damper effect.
+damperStrength=100
+
+; Rumble strength, used for road surface effects.
+; WARNING: THIS WILL CRASH ON FANATEC (maybe even more) WHEELS!
+rumbleStrength=100
+; Rumble duration factor from ms to µs, used to scale the duration of the rumble effect.
+rumbleDuration=1000

dist/idz/start.bat

@@ -2,10 +2,11 @@
 
 pushd %~dp0
 
-inject -k idzhook.dll InitialD0_DX11_Nu.exe
+start /min "AM Daemon" inject -d -k idzhook.dll amdaemon.exe -c configDHCP_Final_Common.json configDHCP_Final_JP.json configDHCP_Final_JP_ST1.json configDHCP_Final_JP_ST2.json configDHCP_Final_EX.json configDHCP_Final_EX_ST1.json configDHCP_Final_EX_ST2.json
+
 rem Set dipsw1=0 and uncomment the ServerBox for in store battle?
 rem inject -k idzhook.dll ServerBoxD8_Nu_x64.exe
-inject -d -k idzhook.dll amdaemon.exe -c configDHCP_Final_Common.json configDHCP_Final_JP.json configDHCP_Final_JP_ST1.json configDHCP_Final_JP_ST2.json configDHCP_Final_EX.json configDHCP_Final_EX_ST1.json configDHCP_Final_EX_ST2.json
+inject -d -k idzhook.dll InitialD0_DX11_Nu.exe
 
 taskkill /im ServerBoxD8_Nu_x64.exe > nul 2>&1
 

idachook/dllmain.c

@@ -5,7 +5,9 @@
 
      USB:   837-15257 "Type 4" I/O Board
     COM1:   838-15069 MOTOR DRIVE BD RS232/422 Board
-    COM2:   837-15070-02 IC BD LED Controller Board
+    COM2:   837-15070-02 IC BD LED Controller Board (DIPSW2 OFF)
+            OR
+            837-15070-04 IC BD LED Controller Board (DIPSW2 ON)
     COM3:   837-15286 "Gen 2" Aime Reader (DIPSW2 OFF)
             OR
             837-15396 "Gen 3" Aime Reader (DIPSW2 ON)

idachook/io4.c

@@ -133,6 +133,8 @@ static HRESULT idac_io4_poll(void *ctx, struct io4_state *state)
 
 static HRESULT idac_io4_write_gpio(uint8_t* payload, size_t len) 
 {
+    assert(idac_dll.led_set_leds != NULL);
+    
     // Just fast fail if there aren't enough bytes in the payload
     if (len < 3) 
         return S_OK;

idzhook/config.c

@@ -18,6 +18,42 @@
 #include "platform/config.h"
 #include "platform/platform.h"
 
+void led15070_config_load(struct led15070_config *cfg, const wchar_t *filename)
+{
+    assert(cfg != NULL);
+    assert(filename != NULL);
+
+    wchar_t tmpstr[16];
+
+    cfg->enable = GetPrivateProfileIntW(L"led15070", L"enable", 1, filename);
+    cfg->port_no = GetPrivateProfileIntW(L"led15070", L"portNo", 0, filename);
+    cfg->fw_ver = GetPrivateProfileIntW(L"led15070", L"fwVer", 0x90, filename);
+    /* TODO: Unknown, no firmware file available */
+    cfg->fw_sum = GetPrivateProfileIntW(L"led15070", L"fwSum", 0x0000, filename);
+
+    GetPrivateProfileStringW(
+            L"led15070",
+            L"boardNumber",
+            L"15070-02",
+            tmpstr,
+            _countof(tmpstr),
+            filename);
+
+    size_t n = wcstombs(cfg->board_number, tmpstr, sizeof(cfg->board_number));
+    for (int i = n; i < sizeof(cfg->board_number); i++)
+    {
+        cfg->board_number[i] = ' ';
+    }
+
+    GetPrivateProfileStringW(
+            L"led15070",
+            L"eepromPath",
+            L"DEVICE",
+            cfg->eeprom_path,
+            _countof(cfg->eeprom_path),
+            filename);
+}
+
 void idz_dll_config_load(
         struct idz_dll_config *cfg,
         const wchar_t *filename)
@@ -47,6 +83,8 @@ void idz_hook_config_load(
     dvd_config_load(&cfg->dvd, filename);
     gfx_config_load(&cfg->gfx, filename);
     idz_dll_config_load(&cfg->dll, filename);
+    ffb_config_load(&cfg->ffb, filename);
+    led15070_config_load(&cfg->led15070, filename);
     zinput_config_load(&cfg->zinput, filename);
 }
 

idzhook/config.h

@@ -5,7 +5,8 @@
 
 #include "amex/amex.h"
 
-#include "board/sg-reader.h"
+#include "board/config.h"
+#include "board/led15070.h"
 
 #include "gfxhook/gfx.h"
 
@@ -23,6 +24,8 @@ struct idz_hook_config {
     struct dvd_config dvd;
     struct gfx_config gfx;
     struct idz_dll_config dll;
+    struct ffb_config ffb;
+    struct led15070_config led15070;
     struct zinput_config zinput;
 };
 

idzhook/dllmain.c

@@ -33,6 +33,7 @@
 #include "idzhook/config.h"
 #include "idzhook/idz-dll.h"
 #include "idzhook/jvs.h"
+#include "idzhook/ffb.h"
 #include "idzhook/zinput.h"
 
 #include "platform/platform.h"
@@ -102,6 +103,12 @@ static DWORD CALLBACK idz_pre_startup(void)
         goto fail;
     }
 
+    hr = idz_jvs_hook_init();
+
+    if (FAILED(hr)) {
+        goto fail;
+    }
+
     hr = amex_hook_init(&idz_hook_cfg.amex, idz_jvs_init);
 
     if (FAILED(hr)) {
@@ -114,6 +121,19 @@ static DWORD CALLBACK idz_pre_startup(void)
         goto fail;
     }
 
+    hr = idz_ffb_hook_init(&idz_hook_cfg.ffb, 1);
+
+    if (FAILED(hr)) {
+        goto fail;
+    }
+
+    hr = led15070_hook_init(&idz_hook_cfg.led15070, idz_dll.led_init, 
+        idz_dll.led_set_fet_output, NULL, idz_dll.led_gs_update, 11, 1);
+
+    if (FAILED(hr)) {
+        goto fail;
+    }
+
     /* Initialize debug helpers */
 
     spike_hook_init(L".\\segatools.ini");

idzhook/ffb.c

@@ -0,0 +1,59 @@
+#include <windows.h>
+
+#include <xinput.h>
+#include <assert.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "board/ffb.h"
+
+#include "idzhook/idz-dll.h"
+
+#include "util/dprintf.h"
+
+static void idz_ffb_toggle(bool active);
+static void idz_ffb_constant_force(uint8_t direction, uint8_t force);
+static void idz_ffb_rumble(uint8_t force, uint8_t period);
+static void idz_ffb_damper(uint8_t force);
+
+static const struct ffb_ops idz_ffb_ops = {
+    .toggle         = idz_ffb_toggle,
+    .constant_force = idz_ffb_constant_force,
+    .rumble         = idz_ffb_rumble,
+    .damper         = idz_ffb_damper
+};
+
+HRESULT idz_ffb_hook_init(const struct ffb_config *cfg, unsigned int port_no)
+{
+    HRESULT hr;
+
+    assert(idz_dll.jvs_init != NULL);
+
+    hr = ffb_hook_init(cfg, &idz_ffb_ops, port_no);
+
+    if (FAILED(hr)) {
+        return hr;
+    }
+
+    return idz_dll.ffb_init();
+}
+
+static void idz_ffb_toggle(bool active)
+{
+    idz_dll.ffb_toggle(active);
+}
+
+static void idz_ffb_constant_force(uint8_t direction, uint8_t force)
+{
+    idz_dll.ffb_constant_force(direction, force);
+}
+
+static void idz_ffb_rumble(uint8_t force, uint8_t period)
+{
+    idz_dll.ffb_rumble(force, period);
+}
+
+static void idz_ffb_damper(uint8_t force)
+{
+    idz_dll.ffb_damper(force);
+}

idzhook/ffb.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#include <windows.h>
+
+#include "board/ffb.h"
+
+HRESULT idz_ffb_hook_init(const struct ffb_config *cfg, unsigned int port_no);

idzhook/idz-dll.c

@@ -24,6 +24,33 @@ const struct dll_bind_sym idz_dll_syms[] = {
     }, {
         .sym = "idz_io_jvs_read_coin_counter",
         .off = offsetof(struct idz_dll, jvs_read_coin_counter),
+    }, {
+        .sym = "idz_io_led_init",
+        .off = offsetof(struct idz_dll, led_init),
+    }, {
+        .sym = "idz_io_led_set_fet_output",
+        .off = offsetof(struct idz_dll, led_set_fet_output),
+    }, {
+        .sym = "idz_io_led_gs_update",
+        .off = offsetof(struct idz_dll, led_gs_update),
+    }, {
+        .sym = "idz_io_led_set_leds",
+        .off = offsetof(struct idz_dll, led_set_leds),
+    }, {
+        .sym = "idz_io_ffb_init",
+        .off = offsetof(struct idz_dll, ffb_init),
+    }, {
+        .sym = "idz_io_ffb_toggle",
+        .off = offsetof(struct idz_dll, ffb_toggle),
+    }, {
+        .sym = "idz_io_ffb_constant_force",
+        .off = offsetof(struct idz_dll, ffb_constant_force),
+    }, {
+        .sym = "idz_io_ffb_rumble",
+        .off = offsetof(struct idz_dll, ffb_rumble),
+    }, {
+        .sym = "idz_io_ffb_damper",
+        .off = offsetof(struct idz_dll, ffb_damper),
     }
 };
 

idzhook/idz-dll.h

@@ -11,6 +11,15 @@ struct idz_dll {
     void (*jvs_read_buttons)(uint8_t *opbtn, uint8_t *gamebtn);
     void (*jvs_read_shifter)(uint8_t *gear);
     void (*jvs_read_coin_counter)(uint16_t *total);
+    HRESULT (*led_init)(void);
+    void (*led_set_fet_output)(const uint8_t *rgb);
+    void (*led_gs_update)(const uint8_t *rgb);
+    void (*led_set_leds)(const uint8_t *rgb);
+    HRESULT (*ffb_init)(void);
+    void (*ffb_toggle)(bool active);
+    void (*ffb_constant_force)(uint8_t direction, uint8_t force);
+    void (*ffb_rumble)(uint8_t period, uint8_t force);
+    void (*ffb_damper)(uint8_t force);
 };
 
 struct idz_dll_config {

idzhook/idzhook.def

@@ -22,3 +22,12 @@ EXPORTS
     idz_io_jvs_read_buttons
     idz_io_jvs_read_coin_counter
     idz_io_jvs_read_shifter
+    idz_io_led_init
+    idz_io_led_set_fet_output
+    idz_io_led_gs_update
+    idz_io_led_set_leds
+    idz_io_ffb_init
+    idz_io_ffb_toggle
+    idz_io_ffb_constant_force
+    idz_io_ffb_rumble
+    idz_io_ffb_damper

idzhook/jvs.c

@@ -24,11 +24,13 @@ static void idz_jvs_read_coin_counter(
         void *ctx,
         uint8_t slot_no,
         uint16_t *out);
+static void idz_jvs_write_gpio(void *ctx, uint32_t state);
 
 static const struct io3_ops idz_jvs_io3_ops = {
     .read_switches      = idz_jvs_read_switches,
     .read_analogs       = idz_jvs_read_analogs,
     .read_coin_counter  = idz_jvs_read_coin_counter,
+    .write_gpio         = idz_jvs_write_gpio
 };
 
 static const uint16_t idz_jvs_gear_signals[] = {
@@ -50,21 +52,20 @@ static const uint16_t idz_jvs_gear_signals[] = {
 
 static struct io3 idz_jvs_io3;
 
+HRESULT idz_jvs_hook_init(void)
+{
+    HRESULT hr;
+
+    assert(idz_dll.jvs_init != NULL);
+
+    return idz_dll.jvs_init();
+}
+
 HRESULT idz_jvs_init(struct jvs_node **out)
 {
     HRESULT hr;
 
     assert(out != NULL);
-    assert(idz_dll.jvs_init != NULL);
-
-    dprintf("JVS I/O: Starting Initial D Zero backend DLL\n");
-    hr = idz_dll.jvs_init();
-
-    if (FAILED(hr)) {
-        dprintf("JVS I/O: Backend error, I/O disconnected; %x\n", (int) hr);
-
-        return hr;
-    }
 
     io3_init(&idz_jvs_io3, NULL, &idz_jvs_io3_ops, NULL);
     *out = io3_to_jvs_node(&idz_jvs_io3);
@@ -175,3 +176,21 @@ static void idz_jvs_read_coin_counter(
 
     idz_dll.jvs_read_coin_counter(out);
 }
+static void idz_jvs_write_gpio(void *ctx, uint32_t state) 
+{
+    assert(idz_dll.led_set_leds != NULL);
+    
+    // Since Sega uses an odd ordering for the first part of the bitfield,
+    // let's normalize the data and just send over bytes for the receiver
+    // to interpret as ON/OFF values.
+    uint8_t rgb_out[6] = {
+        state & IDZ_IO_LED_START ? 0xFF : 0x00,
+        state & IDZ_IO_LED_VIEW_CHANGE ? 0xFF : 0x00,
+        state & IDZ_IO_LED_UP ? 0xFF : 0x00,
+        state & IDZ_IO_LED_DOWN ? 0xFF : 0x00,
+        state & IDZ_IO_LED_RIGHT ? 0xFF : 0x00,
+        state & IDZ_IO_LED_LEFT ? 0xFF : 0x00,
+    };
+
+    idz_dll.led_set_leds(rgb_out);
+}

idzhook/jvs.h

@@ -4,4 +4,6 @@
 
 #include "jvs/jvs-bus.h"
 
+HRESULT idz_jvs_hook_init(void);
+
 HRESULT idz_jvs_init(struct jvs_node **root);

idzhook/meson.build

@@ -32,5 +32,7 @@ shared_library(
         'jvs.h',
         'zinput.c',
         'zinput.h',
+        'ffb.c',
+        'ffb.h',
     ],
 )

idzio/backend.h

@@ -8,4 +8,9 @@ struct idz_io_backend {
     void (*jvs_read_buttons)(uint8_t *gamebtn);
     void (*jvs_read_shifter)(uint8_t *gear);
     void (*jvs_read_analogs)(struct idz_io_analog_state *state);
+    HRESULT (*ffb_init)(void);
+    void (*ffb_toggle)(bool active);
+    void (*ffb_constant_force)(uint8_t direction, uint8_t force);
+    void (*ffb_rumble)(uint8_t period, uint8_t force);
+    void (*ffb_damper)(uint8_t force);
 };

idzio/config.c

@@ -78,11 +78,28 @@ void idz_di_config_load(struct idz_di_config *cfg, const wchar_t *filename)
     }
     
     // FFB configuration
-
+    cfg->ffb_constant_force_strength = GetPrivateProfileIntW(
-    cfg->center_spring_strength = GetPrivateProfileIntW(
             L"dinput",
-                            L"centerSpringStrength",
+            L"constantForceStrength",
-                            30,
+            100,
+            filename);
+
+    cfg->ffb_rumble_strength = GetPrivateProfileIntW(
+            L"dinput",
+            L"rumbleStrength",
+            100,
+            filename);
+
+    cfg->ffb_damper_strength = GetPrivateProfileIntW(
+            L"dinput",
+            L"damperStrength",
+            100,
+            filename);
+
+    cfg->ffb_rumble_duration = GetPrivateProfileIntW(
+            L"dinput",
+            L"rumbleDuration",
+            1000,
             filename);
 }
 

idzio/config.h

@@ -23,7 +23,11 @@ struct idz_di_config {
     bool reverse_accel_axis;
 
     // FFB configuration
-    uint16_t center_spring_strength;
+    uint8_t ffb_constant_force_strength;
+    uint8_t ffb_rumble_strength;
+    uint8_t ffb_damper_strength;
+
+    uint32_t ffb_rumble_duration;
 };
 
 struct idz_xi_config {

idzio/di-dev.c

@@ -1,134 +1,39 @@
 #include <windows.h>
 #include <dinput.h>
-
+#include <stdbool.h>
 #include <assert.h>
 
 #include "idzio/di-dev.h"
 
 #include "util/dprintf.h"
 
-HRESULT idz_di_dev_start(IDirectInputDevice8W *dev, HWND wnd)
+const struct idz_di_config *idz_di_cfg;
+static HWND idz_di_wnd;
+static IDirectInputDevice8W *idz_di_dev;
+
+/* Individual DI Effects */
+static IDirectInputEffect *idz_di_fx;
+static IDirectInputEffect *idz_di_fx_rumble;
+static IDirectInputEffect *idz_di_fx_damper;
+
+/* Max FFB Board value is 127 */
+static const double idz_di_ffb_scale = 127.0;
+
+HRESULT idz_di_dev_init(
+    const struct idz_di_config *cfg,
+    IDirectInputDevice8W *dev,
+    HWND wnd)
 {
     HRESULT hr;
 
     assert(dev != NULL);
     assert(wnd != NULL);
 
-    hr = IDirectInputDevice8_SetCooperativeLevel(
+    idz_di_cfg = cfg;
-            dev,
+    idz_di_dev = dev;
-            wnd,
+    idz_di_wnd = wnd;
-            DISCL_BACKGROUND | DISCL_EXCLUSIVE);
 
-    if (FAILED(hr)) {
+    return S_OK;
-        dprintf("DirectInput: SetCooperativeLevel failed: %08x\n", (int) hr);
-
-        return hr;
-    }
-
-    hr = IDirectInputDevice8_SetDataFormat(dev, &c_dfDIJoystick);
-
-    if (FAILED(hr)) {
-        dprintf("DirectInput: SetDataFormat failed: %08x\n", (int) hr);
-
-        return hr;
-    }
-
-    hr = IDirectInputDevice8_Acquire(dev);
-
-    if (FAILED(hr)) {
-        dprintf("DirectInput: Acquire failed: %08x\n", (int) hr);
-
-        return hr;
-    }
-
-    return hr;
-}
-
-void idz_di_dev_start_fx(
-    IDirectInputDevice8W *dev, IDirectInputEffect **out, uint16_t strength)
-{
-    /* Set up force-feedback on devices that support it. This is just a stub
-       for the time being, since we don't yet know how the serial port force
-       feedback protocol works.
-
-       I'm currently developing with an Xbox One Thrustmaster TMX wheel, if
-       we don't perform at least some perfunctory FFB initialization of this
-       nature (or indeed if no DirectInput application is running) then the
-       wheel exhibits considerable resistance, similar to that of a stationary
-       car. Changing cf.lMagnitude to a nonzero value does cause the wheel to
-       continuously turn in the given direction with the given force as one
-       would expect (max magnitude per DirectInput docs is +/- 10000).
-
-       Failure here is non-fatal, we log any errors and move on.
-
-       https://docs.microsoft.com/en-us/previous-versions/windows/desktop/ee416353(v=vs.85)
-    */
-
-    IDirectInputEffect *obj;
-    DWORD axis;
-    LONG direction;
-    DIEFFECT fx;
-    DICONDITION cond;
-    HRESULT hr;
-
-    assert(dev != NULL);
-    assert(out != NULL);
-
-    *out = NULL;
-
-    dprintf("DirectInput: Starting force feedback (may take a sec)\n");
-
-    // Auto-centering effect
-    axis = DIJOFS_X;
-    direction = 0;
-
-    memset(&cond, 0, sizeof(cond));
-    cond.lOffset = 0;
-    cond.lPositiveCoefficient = strength;
-    cond.lNegativeCoefficient = strength;
-    cond.dwPositiveSaturation = strength; // For FG920?
-    cond.dwNegativeSaturation = strength; // For FG920?
-    cond.lDeadBand = 0;
-
-    memset(&fx, 0, sizeof(fx));
-    fx.dwSize = sizeof(fx);
-    fx.dwFlags = DIEFF_CARTESIAN | DIEFF_OBJECTOFFSETS;
-    fx.dwDuration = INFINITE;
-    fx.dwGain = DI_FFNOMINALMAX;
-    fx.dwTriggerButton = DIEB_NOTRIGGER;
-    fx.dwTriggerRepeatInterval = INFINITE;
-    fx.cAxes = 1;
-    fx.rgdwAxes = &axis;
-    fx.rglDirection = &direction;
-    fx.cbTypeSpecificParams = sizeof(cond);
-    fx.lpvTypeSpecificParams = &cond;
-
-    hr = IDirectInputDevice8_CreateEffect(
-            dev,
-            &GUID_Spring,
-            &fx,
-            &obj,
-            NULL);
-
-    if (FAILED(hr)) {
-        dprintf("DirectInput: Centering spring force feedback unavailable: %08x\n",
-                (int) hr);
-        return;
-    }
-
-    hr = IDirectInputEffect_Start(obj, INFINITE, 0);
-
-    if (FAILED(hr)) {
-        IDirectInputEffect_Release(obj);
-        dprintf("DirectInput: Centering spring force feedback start failed: %08x\n",
-                (int) hr);
-        return;
-    }
-
-    *out = obj;
-
-    dprintf("DirectInput: Centering spring effects initialized with strength %d%%\n", 
-            strength / 100);
 }
 
 HRESULT idz_di_dev_poll(
@@ -167,3 +72,312 @@ HRESULT idz_di_dev_poll(
 
     return hr;
 }
+
+HRESULT idz_di_dev_start(IDirectInputDevice8W *dev, HWND wnd) {
+    HRESULT hr;
+
+    assert(dev != NULL);
+    assert(wnd != NULL);
+
+    hr = IDirectInputDevice8_SetCooperativeLevel(
+            dev,
+            wnd,
+            DISCL_BACKGROUND | DISCL_EXCLUSIVE);
+
+    if (FAILED(hr)) {
+        dprintf("DirectInput: SetCooperativeLevel failed: %08x\n", (int) hr);
+
+        return hr;
+    }
+
+    hr = IDirectInputDevice8_SetDataFormat(dev, &c_dfDIJoystick);
+
+    if (FAILED(hr)) {
+        dprintf("DirectInput: SetDataFormat failed: %08x\n", (int) hr);
+
+        return hr;
+    }
+
+    hr = IDirectInputDevice8_Acquire(dev);
+
+    if (FAILED(hr)) {
+        dprintf("DirectInput: Acquire failed: %08x\n", (int) hr);
+
+        return hr;
+    }
+
+    return hr;
+}
+
+HRESULT idz_di_ffb_init(void)
+{
+    HRESULT hr;
+
+    hr = idz_di_dev_start(idz_di_dev, idz_di_wnd);
+
+    if (FAILED(hr)) {
+        return hr;
+    }
+
+    return S_OK;
+}
+
+void idz_di_ffb_toggle(bool active)
+{
+    if (active) {
+        return;
+    }
+
+    /* Stop and release all effects */
+    /* I never programmed DirectInput Effects, so this might be bad practice. */
+    if (idz_di_fx != NULL) {
+        IDirectInputEffect_Stop(idz_di_fx);
+        IDirectInputEffect_Release(idz_di_fx);
+        idz_di_fx = NULL;
+    }
+
+    if (idz_di_fx_rumble != NULL) {
+        IDirectInputEffect_Stop(idz_di_fx_rumble);
+        IDirectInputEffect_Release(idz_di_fx_rumble);
+        idz_di_fx_rumble = NULL;
+    }
+
+    if (idz_di_fx_damper != NULL) {
+        IDirectInputEffect_Stop(idz_di_fx_damper);
+        IDirectInputEffect_Release(idz_di_fx_damper);
+        idz_di_fx_damper = NULL;
+    }
+}
+
+void idz_di_ffb_constant_force(uint8_t direction_ffb, uint8_t force)
+{
+    /* DI expects a magnitude in the range of -10.000 to 10.000 */
+    uint16_t ffb_strength = idz_di_cfg->ffb_constant_force_strength * 100;
+    if (ffb_strength == 0) {
+        return;
+    }
+
+    DWORD axis;
+    LONG direction;
+    DIEFFECT fx;
+    DICONSTANTFORCE cf;
+    HRESULT hr;
+
+    /* Direction 0: move to the right, 1: move to the left */
+    LONG magnitude = (LONG)(((double)force / idz_di_ffb_scale) * ffb_strength);
+    cf.lMagnitude = (direction_ffb == 0) ? -magnitude : magnitude;
+
+    axis = DIJOFS_X;
+    /* Irrelevant as magnitude descripbes the direction */
+    direction = 0;
+
+    memset(&fx, 0, sizeof(fx));
+    fx.dwSize = sizeof(fx);
+    fx.dwFlags = DIEFF_CARTESIAN | DIEFF_OBJECTOFFSETS;
+    fx.dwDuration = INFINITE;
+    fx.dwGain = DI_FFNOMINALMAX;
+    fx.dwTriggerButton = DIEB_NOTRIGGER;
+    fx.dwTriggerRepeatInterval = INFINITE;
+    fx.cAxes = 1;
+    fx.rgdwAxes = &axis;
+    fx.rglDirection = &direction;
+    fx.cbTypeSpecificParams = sizeof(cf);
+    fx.lpvTypeSpecificParams = &cf;
+
+    if (idz_di_fx != NULL) {
+        // Try to update the existing effect
+        hr = IDirectInputEffect_SetParameters(idz_di_fx, &fx, DIEP_TYPESPECIFICPARAMS);
+        
+        if (SUCCEEDED(hr)) {
+            return;
+        } else {
+            dprintf("DirectInput: Failed to update constant force feedback, recreating effect: %08x\n", (int)hr);
+            // Stop and release the current effect if updating fails
+            IDirectInputEffect_Stop(idz_di_fx);
+            IDirectInputEffect_Release(idz_di_fx);
+            idz_di_fx = NULL;
+        }
+    }
+
+    // Create a new constant force effect
+    IDirectInputEffect *obj;
+    hr = IDirectInputDevice8_CreateEffect(
+            idz_di_dev,
+            &GUID_ConstantForce,
+            &fx,
+            &obj,
+            NULL);
+
+    if (FAILED(hr)) {
+        dprintf("DirectInput: Constant force feedback creation failed: %08x\n", (int) hr);
+        return;
+    }
+
+    hr = IDirectInputEffect_Start(obj, INFINITE, 0);
+    if (FAILED(hr)) {
+        dprintf("DirectInput: Constant force feedback start failed: %08x\n", (int) hr);
+        IDirectInputEffect_Release(obj);
+        return;
+    }
+
+    idz_di_fx = obj;
+}
+
+void idz_di_ffb_rumble(uint8_t force, uint8_t period)
+{
+    /* DI expects a magnitude in the range of -10.000 to 10.000 */
+    uint16_t ffb_strength = idz_di_cfg->ffb_rumble_strength * 100;
+    if (ffb_strength == 0) {
+        return;
+    }
+
+    uint32_t ffb_duration = idz_di_cfg->ffb_rumble_duration;
+
+    DWORD axis;
+    LONG direction;
+    DIEFFECT fx;
+    DIPERIODIC pe;
+    HRESULT hr;
+
+    /* Duration in microseconds,
+       Might be totally wrong as especially on FANATEC wheels as this code will
+       crash the game. TODO: Figure out why this effect will crash on FANATEC! */
+    DWORD duration = (DWORD)((double)force * ffb_duration);
+
+    memset(&pe, 0, sizeof(pe));
+    pe.dwMagnitude = (DWORD)(((double)force / idz_di_ffb_scale) * ffb_strength);
+    pe.lOffset = 0;
+    pe.dwPhase = 0;
+    pe.dwPeriod = duration;
+
+    axis = DIJOFS_X;
+    direction = 0;
+
+    memset(&fx, 0, sizeof(fx));
+    fx.dwSize = sizeof(fx);
+    fx.dwFlags = DIEFF_CARTESIAN | DIEFF_OBJECTOFFSETS;
+    fx.dwDuration = duration;
+    fx.dwGain = DI_FFNOMINALMAX;
+    fx.dwTriggerButton = DIEB_NOTRIGGER;
+    fx.dwTriggerRepeatInterval = INFINITE;
+    fx.cAxes = 1;
+    fx.rgdwAxes = &axis;
+    fx.rglDirection = &direction;
+    fx.cbTypeSpecificParams = sizeof(pe);
+    fx.lpvTypeSpecificParams = &pe;
+
+    if (idz_di_fx_rumble != NULL) {
+        // Try to update the existing effect
+        hr = IDirectInputEffect_SetParameters(idz_di_fx_rumble, &fx, DIEP_TYPESPECIFICPARAMS);
+        
+        if (SUCCEEDED(hr)) {
+            return;
+        } else {
+            dprintf("DirectInput: Failed to update periodic force feedback, recreating effect: %08x\n", (int)hr);
+            // Stop and release the current effect if updating fails
+            IDirectInputEffect_Stop(idz_di_fx_rumble);
+            IDirectInputEffect_Release(idz_di_fx_rumble);
+            idz_di_fx_rumble = NULL;
+        }
+    }
+
+    IDirectInputEffect *obj;
+    hr = IDirectInputDevice8_CreateEffect(
+            idz_di_dev,
+            &GUID_Sine,
+            &fx,
+            &obj,
+            NULL);
+
+    if (FAILED(hr)) {
+        dprintf("DirectInput: Periodic force feedback creation failed: %08x\n", (int) hr);
+        return;
+    }
+
+    hr = IDirectInputEffect_Start(obj, INFINITE, 0);
+    if (FAILED(hr)) {
+        dprintf("DirectInput: Periodic force feedback start failed: %08x\n", (int) hr);
+        IDirectInputEffect_Release(obj);
+        return;
+    }
+
+    idz_di_fx_rumble = obj;
+}
+
+void idz_di_ffb_damper(uint8_t force)
+{
+    /* DI expects a coefficient in the range of -10.000 to 10.000 */
+    uint16_t ffb_strength = idz_di_cfg->ffb_damper_strength * 100;
+    if (ffb_strength == 0) {
+        return;
+    }
+
+    DWORD axis;
+    LONG direction;
+    DIEFFECT fx;
+    DICONDITION cond;
+    HRESULT hr;
+
+    memset(&cond, 0, sizeof(cond));
+    cond.lOffset = 0;
+    cond.lPositiveCoefficient = (LONG)(((double)force / idz_di_ffb_scale) * ffb_strength);
+    cond.lNegativeCoefficient = (LONG)(((double)force / idz_di_ffb_scale) * ffb_strength);
+    /* Not sure on this one */
+    cond.dwPositiveSaturation = DI_FFNOMINALMAX;
+    cond.dwNegativeSaturation = DI_FFNOMINALMAX;
+    cond.lDeadBand = 0;
+
+    axis = DIJOFS_X;
+    direction = 0;
+
+    memset(&fx, 0, sizeof(fx));
+    fx.dwSize = sizeof(fx);
+    fx.dwFlags = DIEFF_CARTESIAN | DIEFF_OBJECTOFFSETS;
+    fx.dwDuration = INFINITE;
+    fx.dwGain = DI_FFNOMINALMAX;
+    fx.dwTriggerButton = DIEB_NOTRIGGER;
+    fx.dwTriggerRepeatInterval = INFINITE;
+    fx.cAxes = 1;
+    fx.rgdwAxes = &axis;
+    fx.rglDirection = &direction;
+    fx.cbTypeSpecificParams = sizeof(cond);
+    fx.lpvTypeSpecificParams = &cond;
+
+    if (idz_di_fx_damper != NULL) {
+        // Try to update the existing effect
+        hr = IDirectInputEffect_SetParameters(idz_di_fx_damper, &fx, DIEP_TYPESPECIFICPARAMS);
+        
+        if (SUCCEEDED(hr)) {
+            return;
+        } else {
+            dprintf("DirectInput: Failed to update damper force feedback, recreating effect: %08x\n", (int)hr);
+            // Stop and release the current effect if updating fails
+            IDirectInputEffect_Stop(idz_di_fx_damper);
+            IDirectInputEffect_Release(idz_di_fx_damper);
+            idz_di_fx_damper = NULL;
+        }
+    }
+
+    // Create a new damper force effect
+    IDirectInputEffect *obj;
+    hr = IDirectInputDevice8_CreateEffect(
+            idz_di_dev,
+            &GUID_Damper,
+            &fx,
+            &obj,
+            NULL);
+
+    if (FAILED(hr)) {
+        dprintf("DirectInput: Damper force feedback creation failed: %08x\n", (int) hr);
+        return;
+    }
+
+    hr = IDirectInputEffect_Start(obj, INFINITE, 0);
+    if (FAILED(hr)) {
+        dprintf("DirectInput: Damper force feedback start failed: %08x\n", (int) hr);
+        IDirectInputEffect_Release(obj);
+        return;
+    }
+
+    idz_di_fx_damper = obj;
+}

idzio/di-dev.h

@@ -5,15 +5,26 @@
 
 #include <stdint.h>
 
+#include "idzio/config.h"
+
 union idz_di_state {
     DIJOYSTATE st;
     uint8_t bytes[sizeof(DIJOYSTATE)];
 };
 
+HRESULT idz_di_dev_init(
+    const struct idz_di_config *cfg,
+    IDirectInputDevice8W *dev,
+    HWND wnd);
+
 HRESULT idz_di_dev_start(IDirectInputDevice8W *dev, HWND wnd);
-void idz_di_dev_start_fx(IDirectInputDevice8W *dev, IDirectInputEffect **out, uint16_t strength);
 HRESULT idz_di_dev_poll(
         IDirectInputDevice8W *dev,
         HWND wnd,
         union idz_di_state *out);
 
+HRESULT idz_di_ffb_init(void);
+void idz_di_ffb_toggle(bool active);
+void idz_di_ffb_constant_force(uint8_t direction, uint8_t force);
+void idz_di_ffb_rumble(uint8_t force, uint8_t period);
+void idz_di_ffb_damper(uint8_t force);

idzio/di.c

@@ -55,6 +55,11 @@ static const struct idz_io_backend idz_di_backend = {
     .jvs_read_buttons   = idz_di_jvs_read_buttons,
     .jvs_read_shifter   = idz_di_jvs_read_shifter,
     .jvs_read_analogs   = idz_di_jvs_read_analogs,
+    .ffb_init           = idz_di_ffb_init,
+    .ffb_toggle         = idz_di_ffb_toggle,
+    .ffb_constant_force = idz_di_ffb_constant_force,
+    .ffb_rumble         = idz_di_ffb_rumble,
+    .ffb_damper         = idz_di_ffb_damper
 };
 
 static HWND idz_di_wnd;
@@ -73,7 +78,6 @@ static uint8_t idz_di_gear[6];
 static bool idz_di_use_pedals;
 static bool idz_di_reverse_brake_axis;
 static bool idz_di_reverse_accel_axis;
-static uint16_t idz_di_center_spring_strength;
 
 HRESULT idz_di_init(
         const struct idz_di_config *cfg,
@@ -166,16 +170,12 @@ HRESULT idz_di_init(
         return HRESULT_FROM_WIN32(ERROR_FILE_NOT_FOUND);
     }
 
-    hr = idz_di_dev_start(idz_di_dev, idz_di_wnd);
+    hr = idz_di_dev_init(cfg, idz_di_dev, idz_di_wnd);
 
     if (FAILED(hr)) {
         return hr;
     }
 
-    // Convert the strength from 0-100 to 0-10000 for DirectInput
-    idz_di_dev_start_fx(idz_di_dev, &idz_di_fx, 
-                        idz_di_center_spring_strength * 100);
-
     if (cfg->pedals_name[0] != L'\0') {
         hr = IDirectInput8_EnumDevices(
                 idz_di_api,
@@ -349,15 +349,24 @@ static HRESULT idz_di_config_apply(const struct idz_di_config *cfg)
         idz_di_gear[i] = cfg->gear[i];
     }
 
-    // FFB configuration
+        /* FFB configuration */
-
+    if (cfg->ffb_constant_force_strength < 0 || cfg->ffb_constant_force_strength > 100) {
-    if (cfg->center_spring_strength < 0 || cfg->center_spring_strength > 100) {
+        dprintf("Wheel: Invalid constant force strength: %i\n", cfg->ffb_constant_force_strength);
-        dprintf("Wheel: Invalid center spring strength: %i\n", cfg->center_spring_strength);
 
         return E_INVALIDARG;
     }
     
-    idz_di_center_spring_strength = cfg->center_spring_strength;
+    if (cfg->ffb_rumble_strength < 0 || cfg->ffb_rumble_strength > 100) {
+        dprintf("Wheel: Invalid rumble strength: %i\n", cfg->ffb_rumble_strength);
+
+        return E_INVALIDARG;
+    }
+
+    if (cfg->ffb_damper_strength < 0 || cfg->ffb_damper_strength > 100) {
+        dprintf("Wheel: Invalid damper strength: %i\n", cfg->ffb_damper_strength);
+
+        return E_INVALIDARG;
+    }
 
     return S_OK;
 }

idzio/dllmain.c

@@ -20,7 +20,7 @@ static uint16_t idz_io_coins;
 
 uint16_t idz_io_get_api_version(void)
 {
-    return 0x0100;
+    return 0x0102;
 }
 
 HRESULT idz_io_jvs_init(void)
@@ -123,3 +123,79 @@ void idz_io_jvs_read_coin_counter(uint16_t *out)
 
     *out = idz_io_coins;
 }
+
+HRESULT idz_io_led_init(void)
+{
+    return S_OK;
+}
+
+void idz_io_led_set_fet_output(const uint8_t *rgb)
+{
+#if 0
+    dprintf("IDZ LED: LEFT SEAT LED: %02X\n", rgb[0]);
+    dprintf("IDZ LED: RIGHT SEAT LED: %02X\n", rgb[1]);
+#endif
+
+    return;
+}
+
+void idz_io_led_gs_update(const uint8_t *rgb)
+{
+#if 0
+    for (int i = 0; i < 9; i++) {
+        dprintf("IDZ LED: LED %d: %02X %02X %02X Speed: %02X\n",
+                i, rgb[i * 4], rgb[i * 4 + 1], rgb[i * 4 + 2], rgb[i * 4 + 3]);
+    }
+#endif
+
+    return;
+}
+
+void idz_io_led_set_leds(const uint8_t *rgb)
+{
+#if 0
+    dprintf("IDZ LED: START: %02X\n", rgb[0]);
+    dprintf("IDZ LED: VIEW CHANGE: %02X\n", rgb[1]);
+    dprintf("IDZ LED: UP: %02X\n", rgb[2]);
+    dprintf("IDZ LED: DOWN: %02X\n", rgb[3]);
+    dprintf("IDZ LED: RIGHT: %02X\n", rgb[4]);
+    dprintf("IDZ LED: LEFT: %02X\n", rgb[5]);
+#endif
+
+    return;
+}
+
+HRESULT idz_io_ffb_init(void)
+{
+    assert(idz_io_backend != NULL);
+
+    return idz_io_backend->ffb_init();
+}
+
+void idz_io_ffb_toggle(bool active)
+{
+    assert(idz_io_backend != NULL);
+    
+    idz_io_backend->ffb_toggle(active);
+}
+
+void idz_io_ffb_constant_force(uint8_t direction, uint8_t force)
+{
+    assert(idz_io_backend != NULL);
+    
+    idz_io_backend->ffb_constant_force(direction, force);
+}
+
+void idz_io_ffb_rumble(uint8_t period, uint8_t force)
+{
+    assert(idz_io_backend != NULL);
+    
+    idz_io_backend->ffb_rumble(period, force);
+}
+
+void idz_io_ffb_damper(uint8_t force)
+{
+    assert(idz_io_backend != NULL);
+    
+    idz_io_backend->ffb_damper(force);
+}

idzio/idzio.def

@@ -6,3 +6,12 @@ EXPORTS
     idz_io_jvs_read_buttons
     idz_io_jvs_read_coin_counter
     idz_io_jvs_read_shifter
+    idz_io_led_init
+    idz_io_led_set_fet_output
+    idz_io_led_gs_update
+    idz_io_led_set_leds
+    idz_io_ffb_init
+    idz_io_ffb_toggle
+    idz_io_ffb_constant_force
+    idz_io_ffb_rumble
+    idz_io_ffb_damper

idzio/idzio.h

@@ -14,6 +14,7 @@
 
 #include <windows.h>
 
+#include <stdbool.h>
 #include <stdint.h>
 
 enum {
@@ -30,6 +31,17 @@ enum {
     IDZ_IO_GAMEBTN_VIEW_CHANGE = 0x20,
 };
 
+enum {
+    /* These are the bitmasks to use when checking which
+       lights are triggered on incoming IO4 GPIO writes. */
+    IDZ_IO_LED_START        = 1 << 7, 
+    IDZ_IO_LED_VIEW_CHANGE  = 1 << 6, 
+    IDZ_IO_LED_UP           = 1 << 1, 
+    IDZ_IO_LED_DOWN         = 1 << 0, 
+    IDZ_IO_LED_RIGHT        = 1 << 14,
+    IDZ_IO_LED_LEFT         = 1 << 15 
+};
+
 struct idz_io_analog_state {
     /* Current steering wheel position, where zero is the centered position.
 
@@ -104,3 +116,107 @@ void idz_io_jvs_read_shifter(uint8_t *gear);
    Minimum API version: 0x0100 */
 
 void idz_io_jvs_read_coin_counter(uint16_t *total);
+
+/* Initialize LED emulation. This function will be called before any
+   other idz_io_led_*() function calls.
+
+   All subsequent calls may originate from arbitrary threads and some may
+   overlap with each other. Ensuring synchronization inside your IO DLL is
+   your responsibility. 
+   
+   Minimum API version: 0x0101 */
+
+HRESULT idz_io_led_init(void);
+
+/* Update the FET outputs. rgb is a pointer to an array up to 3 bytes.
+
+   The following bits are used to control the FET outputs:
+   [0]: LEFT SEAT LED
+   [1]: RIGHT SEAT LED
+
+   The LED is truned on when the byte is 255 and turned off when the byte is 0.
+
+   Minimum API version: 0x0101 */
+
+void idz_io_led_set_fet_output(const uint8_t *rgb);
+
+/* Update the RGB LEDs. rgb is a pointer to an array up to 32 * 4 = 128 bytes. 
+
+   The LEDs are laid out as follows:
+   [0]: LEFT UP LED
+   [1-2]: LEFT CENTER LED
+   [3]: LEFT DOWN LED
+   [5]: RIGHT UP LED
+   [6-7]: RIGHT CENTER LED
+   [8]: RIGHT DOWN LED
+
+   Each rgb value is comprised for 4 bytes in the order of R, G, B, Speed.
+   Speed is a value from 0 to 255, where 0 is the fastest speed and 255 is the slowest.
+
+   Minimum API version: 0x0101 */
+
+void idz_io_led_gs_update(const uint8_t *rgb);
+
+/* Update the cabinet button LEDs. rgb is a pointer to an array up to 6 bytes.
+
+   The LEDs are laid out as follows:
+   [0]: START LED
+   [1]: VIEW CHANGE LED
+   [2]: UP LED
+   [3]: DOWN LED
+   [4]: RIGHT LED
+   [5]: LEFT LED
+
+   The LED is turned on when the byte is 255 and turned off when the byte is 0.
+
+   Minimum API version: 0x0101 */
+
+void idz_io_led_set_leds(const uint8_t *rgb);
+
+/* Initialize FFB emulation. This function will be called before any
+   other idz_io_ffb_*() function calls.
+
+   This will always be called even if FFB board emulation is disabled to allow
+   the IO DLL to initialize any necessary resources.
+
+   Minimum API version: 0x0102 */
+
+HRESULT idz_io_ffb_init(void);
+
+/* Toggle FFB emulation. If active is true, FFB emulation should be enabled.
+   If active is false, FFB emulation should be disabled and all FFB effects
+   should be stopped and released.
+
+   Minimum API version: 0x0102 */
+
+void idz_io_ffb_toggle(bool active);
+
+/* Set a constant force FFB effect.
+   
+   Direction is 0 for right and 1 for left.
+   Force is the magnitude of the force, where 0 is no force and 127 is the
+   maximum force in a given direction.
+
+   Minimum API version: 0x0102 */
+
+void idz_io_ffb_constant_force(uint8_t direction, uint8_t force);
+
+/* Set a (sine) periodic force FFB effect.
+   
+   Period is the period of the effect in milliseconds (not sure).
+   Force is the magnitude of the force, where 0 is no force and 127 is the
+   maximum force.
+
+   Minimum API version: 0x0102 */
+
+void idz_io_ffb_rumble(uint8_t period, uint8_t force);
+
+/* Set a damper FFB effect.
+   
+   Force is the magnitude of the force, where 0 is no force and 40 is the
+   maximum force. Theoretically the maximum force is 127, but the game only
+   uses a maximum of 40.
+
+   Minimum API version: 0x0102 */
+
+void idz_io_ffb_damper(uint8_t force);

idzio/xi.c

@@ -18,12 +18,23 @@ static void idz_xi_jvs_read_buttons(uint8_t *gamebtn_out);
 static void idz_xi_jvs_read_shifter(uint8_t *gear);
 static void idz_xi_jvs_read_analogs(struct idz_io_analog_state *out);
 
+static HRESULT idz_xi_ffb_init(void);
+static void idz_xi_ffb_toggle(bool active);
+static void idz_xi_ffb_constant_force(uint8_t direction, uint8_t force);
+static void idz_xi_ffb_rumble(uint8_t force, uint8_t period);
+static void idz_xi_ffb_damper(uint8_t force);
+
 static HRESULT idz_xi_config_apply(const struct idz_xi_config *cfg);
 
 static const struct idz_io_backend idz_xi_backend = {
     .jvs_read_buttons   = idz_xi_jvs_read_buttons,
     .jvs_read_shifter   = idz_xi_jvs_read_shifter,
     .jvs_read_analogs   = idz_xi_jvs_read_analogs,
+    .ffb_init           = idz_xi_ffb_init,
+    .ffb_toggle         = idz_xi_ffb_toggle,
+    .ffb_constant_force = idz_xi_ffb_constant_force,
+    .ffb_rumble         = idz_xi_ffb_rumble,
+    .ffb_damper         = idz_xi_ffb_damper
 };
 
 static bool idz_xi_single_stick_steering;
@@ -210,3 +221,35 @@ static void idz_xi_jvs_read_analogs(struct idz_io_analog_state *out)
     out->accel = xi.Gamepad.bRightTrigger << 8;
     out->brake = xi.Gamepad.bLeftTrigger << 8;
 }
+
+static HRESULT idz_xi_ffb_init(void) {
+    return S_OK;
+}
+
+static void idz_xi_ffb_toggle(bool active) {
+    XINPUT_VIBRATION vibration;
+
+    memset(&vibration, 0, sizeof(vibration));
+
+    XInputSetState(0, &vibration);
+}
+
+static void idz_xi_ffb_constant_force(uint8_t direction, uint8_t force) {
+    return;
+}
+
+static void idz_xi_ffb_rumble(uint8_t force, uint8_t period) {
+    XINPUT_VIBRATION vibration;
+    /* XInput max strength is 65.535, so multiply the 127.0 by 516. */
+    uint16_t strength = force * 516;
+
+    memset(&vibration, 0, sizeof(vibration));
+    vibration.wLeftMotorSpeed = strength;
+    vibration.wRightMotorSpeed = strength;
+
+    XInputSetState(0, &vibration);
+}
+
+static void idz_xi_ffb_damper(uint8_t force) {
+    return;
+}