Merge remote-tracking branch 'origin/main'
ERR0RPR0MPT
commit
b1b483a023
|
|
@ -56,6 +56,7 @@
|
|||
16. 如果单点延迟低但滑动时延迟极大, 请将脚本中 `TOUCH_THREAD_SLEEP_MODE` 修改为 false,
|
||||
或者可以调小 `TOUCH_THREAD_SLEEP_DELAY` 的值(如果还是卡请提 issue 反馈)
|
||||
|
||||
|
||||
## 命令列表
|
||||
|
||||
游戏时如果不小心断开连接, 请在控制台输入 `start` 并回车来重新连接游戏
|
||||
|
|
@ -72,9 +73,13 @@ Q: 在安卓高版本(13,14)上测试触摸区域完全对不上，只有点屏
|
|||
|
||||
A: 按步骤修改脚本内 `ANDROID_ABS_MONITOR_SIZE` 和 `ANDROID_ABS_INPUT_SIZE` 配置
|
||||
|
||||
Q: 关闭再打开报错
|
||||
|
||||
A: 如果直接关闭控制台窗口有可能导致后台进程残留，请使用任务管理器彻底关闭进程或者使用Ctrl+C终止程序
|
||||
|
||||
## 注意
|
||||
|
||||
想要加 2P 的重新复制一下脚本并添加串口 COM4 到 COM44 的转发就好
|
||||
想要加 2P 的重新复制一下脚本并添加串口 COM4 到 COM44 的转发，并且在配置文件“SPECIFIED_DEVICES”中指定使用“adb devices”获取到的设备序列号
|
||||
|
||||
该脚本仅用于测试, 目前来说打 12+及以下应该是问题不大, 12+以上水平不够没试过.
|
||||
|
||||
|
|
|
|||
|
|
@ -20,6 +20,8 @@ ANDROID_REVERSE_MONITOR: false
|
|||
TOUCH_THREAD_SLEEP_MODE: false
|
||||
# 每次 sleep 的延迟, 单位: 微秒, 默认 100 微秒
|
||||
TOUCH_THREAD_SLEEP_DELAY: 100
|
||||
#当需要指定触控设备时填上使用“adb devices”获取到的设备序列号，留空则只支持单设备连接
|
||||
SPECIFIED_DEVICES: ""
|
||||
|
||||
# RGB 颜色值对应区块配置
|
||||
exp_image_dict:
|
||||
|
|
|
|||
66
main.py
66
main.py
|
|
@ -32,6 +32,8 @@ ANDROID_REVERSE_MONITOR = False
|
|||
TOUCH_THREAD_SLEEP_MODE = False
|
||||
# 每次 sleep 的延迟, 单位: 微秒, 默认 100 微秒
|
||||
TOUCH_THREAD_SLEEP_DELAY = 100
|
||||
#当需要指定触控设备时填上使用“adb devices”获取到的设备序列号，留空则只支持单设备连接
|
||||
SPECIFIED_DEVICES = ""
|
||||
|
||||
exp_list = [
|
||||
["A1", "A2", "A3", "A4", "A5", ],
|
||||
|
|
@ -52,12 +54,14 @@ exp_image_dict = {'41-65-93': 'A1', '87-152-13': 'A2', '213-109-81': 'A3', '23-2
|
|||
|
||||
|
||||
class SerialManager:
|
||||
p1Serial = serial.Serial(COM_PORT, COM_BAUDRATE)
|
||||
settingPacket = bytearray([40, 0, 0, 0, 0, 41])
|
||||
startUp = False
|
||||
recvData = ""
|
||||
|
||||
|
||||
def __init__(self):
|
||||
self.p1Serial = serial.Serial(COM_PORT, COM_BAUDRATE)
|
||||
self.settingPacket = bytearray([40, 0, 0, 0, 0, 41])
|
||||
self.startUp = False
|
||||
self.recvData = ""
|
||||
|
||||
self.touchQueue = queue.Queue()
|
||||
self.data_lock = threading.Lock()
|
||||
self.touchThread = threading.Thread(target=self.touch_thread)
|
||||
|
|
@ -249,54 +253,58 @@ def getevent():
|
|||
touch_index = 0
|
||||
|
||||
# 执行 adb shell getevent 命令并捕获输出
|
||||
process = subprocess.Popen(['adb', 'shell', 'getevent', '-l'], stdin=subprocess.PIPE, stdout=subprocess.PIPE)
|
||||
adb_cmd = 'adb shell getevent -l'
|
||||
if SPECIFIED_DEVICES:
|
||||
adb_cmd = 'adb -s ' + SPECIFIED_DEVICES + ' shell getevent -l'
|
||||
process = subprocess.Popen(adb_cmd, stdin=subprocess.PIPE, stdout=subprocess.PIPE)
|
||||
key_is_changed = False
|
||||
|
||||
# 读取实时输出
|
||||
for line in iter(process.stdout.readline, b''):
|
||||
try:
|
||||
|
||||
event = line.decode('utf-8').strip()
|
||||
_, _, event_type, event_value = event.split()
|
||||
# print(event_type, int(event_value, 16))
|
||||
parts = event.split()
|
||||
|
||||
# 屏蔽没用的东西
|
||||
if len(parts) < 4:
|
||||
continue
|
||||
|
||||
event_type = parts[2]
|
||||
event_value_hex = parts[3]
|
||||
event_value = int(event_value_hex, 16)
|
||||
|
||||
if event_type == 'ABS_MT_POSITION_X':
|
||||
key_is_changed = True
|
||||
if not ANDROID_REVERSE_MONITOR:
|
||||
touch_data[touch_index]["x"] = int(int(event_value, 16) * abs_multi_x)
|
||||
else:
|
||||
touch_data[touch_index]["x"] = ANDROID_ABS_MONITOR_SIZE[0] - int(int(event_value, 16) * abs_multi_x)
|
||||
touch_data[touch_index]["x"] = (ANDROID_ABS_MONITOR_SIZE[0] - event_value * abs_multi_x) if ANDROID_REVERSE_MONITOR else event_value * abs_multi_x
|
||||
|
||||
elif event_type == 'ABS_MT_POSITION_Y':
|
||||
key_is_changed = True
|
||||
if not ANDROID_REVERSE_MONITOR:
|
||||
touch_data[touch_index]["y"] = int(int(event_value, 16) * abs_multi_y)
|
||||
else:
|
||||
touch_data[touch_index]["y"] = ANDROID_ABS_MONITOR_SIZE[1] - int(int(event_value, 16) * abs_multi_y)
|
||||
touch_data[touch_index]["y"] = (ANDROID_ABS_MONITOR_SIZE[1] - event_value * abs_multi_y) if ANDROID_REVERSE_MONITOR else event_value * abs_multi_y
|
||||
|
||||
elif event_type == 'SYN_REPORT':
|
||||
if not key_is_changed:
|
||||
continue
|
||||
# print("Touch Data:", touch_data)
|
||||
# 向 convert 函数发送数据
|
||||
key_is_changed = False
|
||||
# start_time = time.perf_counter()
|
||||
if key_is_changed:
|
||||
convert(touch_data)
|
||||
# print("单次执行时间:", (time.perf_counter() - start_time) * 1e3, "毫秒")
|
||||
key_is_changed = False
|
||||
|
||||
elif event_type == 'ABS_MT_SLOT':
|
||||
key_is_changed = True
|
||||
touch_index = int(event_value, 16)
|
||||
touch_index = event_value
|
||||
if touch_index >= touch_sum:
|
||||
touch_sum = touch_index + 1
|
||||
|
||||
elif event_type == 'ABS_MT_TRACKING_ID':
|
||||
key_is_changed = True
|
||||
if event_value == "ffffffff":
|
||||
if event_value_hex == "ffffffff":
|
||||
touch_data[touch_index]['p'] = False
|
||||
touch_sum = max(0, touch_sum - 1)
|
||||
else:
|
||||
touch_data[touch_index]['p'] = True
|
||||
touch_sum += 1
|
||||
else:
|
||||
continue
|
||||
except Exception:
|
||||
|
||||
except Exception as e:
|
||||
event_error_output = line.decode('utf-8')
|
||||
if "name" in event_error_output:
|
||||
if "name" not in event_error_output:
|
||||
continue
|
||||
print(event_error_output)
|
||||
|
||||
|
|
@ -321,6 +329,7 @@ if __name__ == "__main__":
|
|||
TOUCH_THREAD_SLEEP_MODE = c["TOUCH_THREAD_SLEEP_MODE"]
|
||||
TOUCH_THREAD_SLEEP_DELAY = c["TOUCH_THREAD_SLEEP_DELAY"]
|
||||
exp_image_dict = c["exp_image_dict"]
|
||||
SPECIFIED_DEVICES = c["SPECIFIED_DEVICES"]
|
||||
else:
|
||||
print("未找到配置文件, 使用默认配置")
|
||||
|
||||
|
|
@ -330,6 +339,7 @@ if __name__ == "__main__":
|
|||
abs_multi_y = ANDROID_ABS_MONITOR_SIZE[1] / ANDROID_ABS_INPUT_SIZE[1]
|
||||
print("当前触控区域X轴放大倍数:", abs_multi_x)
|
||||
print("当前触控区域Y轴放大倍数:", abs_multi_y)
|
||||
print("当前链接到端口：", COM_PORT)
|
||||
print(('已' if ANDROID_REVERSE_MONITOR else '未') + "开启屏幕反转")
|
||||
serial_manager = SerialManager()
|
||||
serial_manager.start()
|
||||
|
|
|
|||
Loading…
Reference in New Issue